Check The Operation Of The Loaded Camera - Olympus PT-032 Manual De Instrucciones

Check the operation of the loaded camera.

After sealing the Case, check that the camera functions normally.
1. Push the POWER button on the Case and confirm that the camera
turns ON/OFF.
2. Turn the mode switch on the Case and confirm that the camera
mode switches properly.
3. Confirm that the mode displayed on the camera's LCD monitor
coincides with the position of the mode dial on the rear lid of the
Case.
4. Push the shutter lever on the Case and confirm that the camera
shutter releases.
Also operate other control buttons on the Case and confirm that
the camera functions properly.
CAUTION : • If the camera does not function properly, restart the digital
camera installation procedure from "Check the digital
camera." on page E-14 of this manual.
E-19