Britax MARATHON CLICKTIGHT Guia Del Usuario página 32

Britax Child Safety, Inc.
Using the Tether
IMPORTANT:
facing installations. To improve rear-facing performance
of this child seat an anti-rebound bar can be purchased at
us.britax.com.
To attach the tether to a tether anchor:
1. Firmly press the hook over
the tether anchor point.
2. Pull the loose end of the
webbing to remove slack
from the tether.
NOTE: If the tether is
too short for use in your
vehicle, contact Britax
Consumer Services at
1-888-427-4829 or 1-704-
409-1699 to obtain a tether
extender.
To remove the tether from a tether anchor:
1. Loosen the tether.
a. Tilt the lock up.
b. Pull the tether webbing.
2. Remove the tether hook
from the tether anchor.
NOTE: Store the tether in the tether compartment when
not in use and ensure the tether compartment door is
fully closed.
30
Do not use the top tether strap with rear-
a
b