Lap Belt Installation - Britax MARATHON CLICKTIGHT Guia Del Usuario

Britax Child Safety, Inc.

Lap Belt Installation

1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar, if included (see page
27).
3. Recline the unoccupied
child seat and place
rear-facing on the vehicle
seat. Ensure that no more
than 3 in. (7.6 cm) of the
base hangs over the edge
of the vehicle seat (see
pages 25-26).
4. Slide the vehicle belt into
the rear-facing belt slots.
5. Ensure the vehicle belt is
not twisted and buckle
the seat belt.
6. Lock and remove slack
from the vehicle belt.
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
12
1a
3"
1b