Display During Regeneration; Manual Regeneration - Pentair FOLEO 5800 XTR Manual Del Usuario

User Guide Foleo
7 . Operation
7.1. Display during operation
7.2.

Display during regeneration

During regeneration, the regeneration cycle wheel shows the regeneration step the valve is advancing to, or has reached
(green), and the time remaining in that step (1). Once all regeneration steps are complete the valve returns to treatment position
and resumes normal operation. The time remaining in regeneration will be displayed on the home screen in hours and minutes.
Pressing the button during a regeneration cycle immediately advances the valve to the next cycle step position and resumes
normal step timing. The
7.3.

Manual regeneration

From the home screen, press the regeneration button
now
Press to begin a regeneration immediately, or press
regeneration time (2:00 AM default for softeners, 12:00 AM default for filters). Pressing
manual regeneration.
16 / 116
Water treatment
wed
12:01 am
treatment
rapid rinse
backwash
Regeneration
treatment
rapid rinse
backwash
button is only shown when the valve is in position and the motor has stopped.
Regeneration
at regen. time
4.5
3
m
tank refill
pause
draw
48 m
34 s
tank refill
pause
draw
to access the regeneration screen.
now
at regen. time
to queue the regeneration for the programmed
at regen. time
again will cancel the
Ref. MKT-UG-038 / D - 15.11.2019