HP LaserJet 1022nw Guida Rapida página 29

r.
NOTE The signal indicator in the top right corner of the computer screen will change to Your
Network Mode.
3. Setting up a print queue
a. Open Print Center or Printer Setup Utility. (Click the hard drive icon, select
b. Add the printer using Rendezvous.
NOTE You can add a printer using Rendezvous only. AppleTalk and TCP/IP are not supported.
c. Print a test page using Text Edit to verify functionality of the printer. (To open the
ENWW
Click Apply.
The printer is ready for wireless use.
Applications, click Utility, and then Print Center or Printer Setup Utility.)
application, click on the hard drive icon, select Applications, and then click on Text
Edit.)
Connect the printer to a wireless only network 23