Ventilation System - AGV HORIZON SKYLINE Manual De Instrucciones

1
2

2) VENTILATION SYSTEM

Closed
1.3) Customised visor opening
For the Horizon and the Skyline, the tooth mechanism can be replaced
and the visor opening customised. The 3 mechanisms available have
different numbers of different thickness teeth, depending on the type
of use.
- Touring mechanism (fitted as standard). Red. Functions: visor lock in
open or closed position and intermediate visor lock positions.
- Race mechanism (supplied in box). Blue. Functions: visor lock in fully
open or fully closed position without intermediate positions.
- Urban mechanism (supplied in box). Green. Functions: visor lock in
open or closed position, intermediate visor lock positions and micro-
opening.
To remove the tooth mechanism, pull it outwards (1). To reinstall or
replace it, position it in its housing and push the mechanism (2) until it
clicks into place.
Channels through polystyrene
Upper air extractor (only on Horizon)
2.1) Opening/Closing front air inlets
Open
To open or close the front air inlets, move the cursor until it clicks into
position.
2.2) Opening/Closing chin guard air inlets
To open or close the chin guard air inlets, lower or raise the air inlet
mechanism.
Front air inlets
Muzzle air inlet
Cursor
13 2