Eco (energy-saving) mode
-
maximum working temperature is 18°C by
default. When the environment temperature
is below 18°C, select ECO energy-saving mode
and the heater will be full power (high-
grade) heating. When the temperature reaches
18°C, the heater automatically switches to low-
grade heating in low-grade working condition.
When the temperature is reduced to 16°C, the
heater will automatically recover heating.
Economy heating mode
-
automatically switches to the state of economic
heating (that is, the temperature is 3°C lower
than the comfort temperature).
Comfortable heating mode
-
will be in the full power (high grade) heating state.
Temperature setting
Touch temperature key
flickers. Touch
or
and the machine will automatically default the
temperature after 10 seconds. The temperature range of
the heater is between 15 to 50°C.
Only you can set the temperature in the
comfort mode
default.
When the environment temperature is higher than the
set temperature of 1 degree, the heater stops heating.
When the product stops heating (The heating icon is
extinguished at the same time, and corresponding pattern
icon is still displayed), when the environment temperature
is below 1 degrees , the heater will automatically recover
heating. (heating icon
Timing setting
Touch
, and hour time 00: flickers. Touch
to set hour time, and then touch
time flickers. Touch
or
In the anti frost mode state, we can set an appointment
to open the machine.(that is, after completing the
appointment, the heater enters the high-grade
heating mode .) In the heating state, an appointment
can be set up for shutdown.( that is, after completing
the appointment, the heater stops heating and
automatically enters anti frost mode. )The timing time
decreases with time and the display time also decreases
meanwhile. (when the timing state is not set, the time is
shown as 00:00).
Week mode setting
3.
Start week mode
Touch on-off button
: the screen is displaying
environment temperature , display time (00:00), anti
frost function icon
, and day mode icon
English
– the
– the heater will
– the heater
, and temperature display
to set proper temperature,
; the other modes are set by
is displayed meanwhile).
or
again: 00: minute
to set minute time.
at that
time. Touch
or
to switch to week mode
, and week mode icon
week mode standby state, and the screen is displaying
environment temperature at that time, and display date
; mode number P1; time (00:00), anti frost function
icon
, and week mode icon
Time setting
-
press
, date
set date within one week (1 to 7 any day);
-
then press
, time 00 : flickering and press
or
to set time from 1 to24 hours.
-
press timing key
press up key
or down key
from 0 to 59 minutes.
Week mode setting:
-
enter week mode
icon
flickering. Press
week mode
-
date
flickering, press
(1 to 7 any day); then press
pattern number flickering .
-
Press
or
to select any suitable working
mode and then press
the selected pattern number will be light for a
long time . Then press
and set the next day's mode. According to the
above settings, the operation process can be set
in turn (Monday to Sunday any day, and P1 to
P5 any one suitable working mode).
Temperature setting:
-
touch
, and temperature display flickers.
Touch
or
to set proper temperature
within the temperature setting range of 15 to
50 degrees.
-
When the environment temperature is higher
than the set temperature of 1 degrees, the
heater stops heating. When the environment
temperature is below 1 degrees, the heater will
automatically recover heating.
The set temperature is the temperature in the comfort
mode, while temperature of other modes cannot be set
freely. Default temperature of economic model
degrees lower than comfortable mode
saving mode
automatically defaults to 18 degrees, and
anti frost default mode
degrees.
The machine can automatically remember set
programs. As long as the power supply is
constantly opened, the set program and time keep
working at all time. If the power goes off, you need to
revise the time next time you open it, but the other
settings will not change.
flickers. Touch
: enter
.
flickering, press
or
,00 minute: flickering and
to set time
setting state, week mode
to confirm, and
icon stops flickering.
or
to select date
to confirm,
to confirm so that
, date
flickering,
is 3
. ECO energy-
automatically defaults to 5
Usage and Storage Instructions
EN
to
5