OFFCAR 900 Serie Instrucciones De Instalación, Uso Y Mantenimiento página 73

R
EPLACEMENT OF SIGNAL LAMP
Disconnect the power cables.
-
Remove the signal lamp, unscrewing the fixed to the control pane .
-
Fit the new signal lamp in the reverse order of operation.
-
R
EPLACEMENT OF WORKING OR SAFETY THERMOSTAT
Disconnect power cables, after having removed the front panel.
-
- Remove the insulation protection, unloosing the fixing screws to the pan.
Remove the protection panel of heating elements.
-
Remove the support plate of central heating element.
-
Remove the central heating element and then the fixing bulb boss.
-
Replacing the new thermostat be careful about tightening of the boss on the bulbs.
-
If the bulbs would be squeezed, this would cause the damage of thermostat.
R
EPLACEMENT OF THE SWITCH
Disconnect the power cables, after having removed the front panel.
-
- Replace the switch uloosing the fixing screws to the support , after having taken off the
coaxial working thermostat.
Fit the new switch in the reverse order of operation.
-
Instruction manual for installation, maintenance and use
Electric tilting cooker Serie 900
- GB - 16 di 28
Page