Bemer 3000 Manual Del Usuario página 63

9.1 Control unit – coil mat
1. Press the 'ON' button.
The illuminated display of the ON button and the polarity
change display indicate that the system is ready for use.
2. Select the desired intensity by pressing one of the intensity
levels 1 to 10 (8 minutes duration each).
- The selected intensity level will light up. Running lights for all
intensity levels indicate the proper function of the system.
The time display indicates the remaining therapy time in
2 minute intervals.
Instead of the intensity levels you can also select one of the four
programs (P1 to P4).
P1 = 8 min., P2 = 12 min., P3 = 16 min., P4 = 20 min.
63
english