Bemer 3000 Manual Del Usuario página 66

To restart the unit, repeat step 2.
If you want to stop the therapy before the programmed time,
press the STOP button.
If you want to disable the acoustic signal (three beeps) at the
end of the treatment, keep the respective button depressed for
approx. 2 seconds when activating the level or program of your
choice.
An increased intensity results from the
targeted treatment with the intensive
applicator; however, no negative effects are
known or to be expected.
9.3 BEMER Control
The BEMER Control is a handy, maintenance free, battery oper-
ated control instrument that makes the electromagnetic field
created by the BEMER impulse audible. The BEMER Control can
be used to check the function of the system and to demon-
strate the existence and intensity of the electromagnetic field.
The contents include a 9 V block battery that is not yet con-
nected. When the battery is discharged it can be replaced
with any standard 9 V block battery.
(Please take note of Item 12.3)
66
english