Start A Scan And Test Digital Sending Settings - HP Scanjet 7000n Serie Guía De Inicio

4. Align the edges of the documents by tapping the bottom of the stack against the table top. Rotate
the stack 90 degrees and repeat.
5. Gently set the stack in the document feeder. Load the pages face down with the top of the pages
pointing into the feeder.
NOTE: For best results, do not drop the stack into the feeder and do not tap the top edge of
the stack after you have placed it in the document feeder.
6. Verify that the paper guides are aligned with the edges of the stack.

Start a scan and test digital sending settings

To test the configuration of the scanner and the digital sending settings, perform the following steps.
1. Place a document face-down in the document feeder.
2. From the Home screen, touch the E-mail button and complete the From:, To:, and Subject:
fields. (Optional) Complete the cc: and bcc: fields. Separate multiple e-mail addresses with
semicolons.
3. (Optional) Touch the More Options button to change settings for the scan.
10 Install and set up the product