Emerson VOLTA CF590BQ00 Manual Del Usuario página 12

5.3
Rotate the Light Kit Assembly clockwise to engage the two
6-32 x 3/8" Truss Head Screws with Lockwashers in the
key hole slots.
Reinstall the previously removed 6-32 x 3/8" Truss Head
Screw with Lockwasher (Figure 18).
Retighten the three 6-32 x 3/8" Truss Head Screws with
Lockwashers to securely assemble the Light Kit Assembly
to the Light Kit Adapter.
Spare 6-32 x 3/8" Truss Head Screw with Lockwasher in
the parts bag.
5.4
Place the Shade into the opening of the Light Kit
Adapter/Light Kit Assembly, aligning the three flat areas on
the top edge of the Shade with the three raised dimples on
the Light Kit Adapter/Light Kit Assembly and turn the
Shade clockwise until it stops (Figure 19).
NOTE: Periodically check that the Shade is seated
fully clockwise in the Light Kit Adapter/ Light Kit
Assembly.
5. Light Kit Assembly
(Continued)
ROTATE
CLOCKWISE
REINSTALL ONE 6-32 x 3/8" TRUSS
HEAD SCREW WITH LOCKWASHER
AND TIGHTEN SECURELY
Figure 18
FLAT AREA OF
SHADE
Figure 19
12
ENGAGE AND TIGHTEN
THE TWO 6-32 x 3/8"
TRUSS HEAD SCREWS
WITH LOCKWASHERS
LIGHT KIT
ASSEMBLY
H
ROTATE
CLOCKWISE
RAISED
DIMPLES (3)
SHADE
ETL Model No.: CF590