Light Kit Led Assembly - Emerson VOLTA CF590BQ00 Manual Del Usuario

NOTE: If installing Ceiling Fan without the Light Kit
Assembly, Skip to Section 6. Optional Installation of
No-Light Plate Assembly, Step 6.4.
5.1
Engage the fan motor 2-pin wire connector into the
2-pin wire connector of the Light Kit Assembly
(Figure 16).
The connection is complete when you hear a soft click.
5.2
Remove one of the three 6-32 x 3/8" Truss Head Screws
with Lockwashers in the Light Kit Adapter and loosen the
remaining two screws (Figure 17). Retain the screw and
lockwasher for future use.
Carefully tuck all the wires into the Light Kit Adapter prior to
installing the Light Kit Assembly (Figure 17).
Position the Light Kit Assembly key hole slots onto the two
loosened 6-32 x 3/8" Pan Head Screws with
Lockwashers.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the Light Kit Assembly and the Light Kit
Adapter.
5. Light Kit Assembly
FAN MOTOR
ASSEMBLY
2-PIN CONNECTOR
LIGHT KIT ASSEMBLY
2-PIN CONNECTOR
Figure 17
11
Figure 16
LOOSEN THE TWO 6-32 x 3/8" TRUSS HEAD
SCREWS WITH LOCKWASHERS
REMOVE ONE 6-32 x 3/8" TRUSS HEAD
SCREW WITH LOCKWASHER
Please contact 1-800-654-3545 for further assistance
H
LIGHT KIT
ADAPTER
LIGHT KIT
ASSEMBLY
emersonfans.com
ETL Model No.: CF590