Bartscher E 5230 Manual De Instrucciones página 70

Combi steam cooking/baking
D 1
D 2
D 3
T 9
D 4
- 66 -
To turn the device on, press the button
The function buttons
and the device is ready to accept function
settings. The LED display
T 1
"MANUAL".
To select COMBI STEAM COOKING press
T 4
button .
The desired temperature is set by pressing
T 4
button. If button
the desired temperature (50 ° C - 270 ° C).
Now confirm your selection by pressing
T 6
button or using
temperature is displayed on LED
The device will automatically pass to the time
T 8
setting mode (
Set the desired time turning dial
confirm your selection pressing button
T 10
M
dial .
The selected time is displayed on LED
The device will automatically pass to the fan
speed setting mode (
Select the desired fan speed with dial
are 3 speed available) and confirm your
T 16
selection by pressing button
The selected fan speed is displayed on
D 3.
LED
The device will automatically adjust to the
Moisture setting. Button
M
Press this button and select the desired
moisture setting using the dial
manual mode and 0 - 100 (10 levels) in
programmed mode. Confirm your chice using
the button
To start the device, press
T 2 – T 3 - T 4
D 4
T 6
is flashing use dial
M
dial. The selected
T 8
button flashes).
T 9
button flashes).
T 9
T 10
T 10 M
or dial .
T 16
T1
.
will flash,
will read
T 6
M
to set
T 6
D 1
.
M
and then
T 8
or
D 2
.
M
(there
M
or dial .
will flash.
M
: 1-10 in
.