General Safety Instructions - LaserLiner CompactCross-Laser Manual Del Usuario

Completely read through the operating instructions,
the "Warranty and Additional Information" booklet
!
as well as the latest information under the internet
link at the end of these instructions. Follow the
instructions they contain. This document must be
kept in a safe place and passed on together with
the device.
Function / Application
The automatic cross-line laser for aligning tiles,
wall studding, windows, doors etc.
– The slope-mode feature is an extra that permits gradients
to be laid out.
– RX-ready: integrated hand-held receiver mode
– Bluetooth interface for remote control of the device
®
– Automatic levelling range 4°, Accuracy 0,35 mm / m

General safety instructions

General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety
specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
– Please ensure compliance with the safety regulations set out
by local and national authorities with regard to the correct
and proper use of the device.
Safety instructions
Using class 2 lasers
10 EN
Laser radiation!
Do not stare into the beam!
Class 2 laser · < 1 mW · 635 nm
EN 60825-1:2014