Philips TT3003 Manual Del Usuario página 27

a Keep the flash button pressed. The
appliance releases one flash after another
as long as the safety ring is in full contact
with the skin. Immediately after the
appliance has flashed, slide the appliance
to the next area. Make sure the safety ring is
fully pressed onto the skin.
This 'Slide & Flash mode' is especially
convenient for treatment of larger areas like
the legs.
b Let go of the flash button after each flash.
For the next flash, place the appliance on
the area right next to the previously flashed
area. Make sure the safety ring is fully
pressed onto the skin.
This 'Step & Flash mode' guarantees a
precise treatment of e.g. the knees or ankles.
Note: After a few seconds, the appliance is
ready to flash again, so make sure that you
move it to the next area immediately after it has
flashed.
Do not treat exactly the same area
multiple times during one session. This
does not improve the effectiveness of the
treatment, but increases the risk of skin
reaction.
Note: The visible light produced by the
appliance is the reflection of the flash in the skin
and is harmless to your eyes. It is not necessary
to wear goggles during use.
27
English