Philips TT3003 Manual Del Usuario página 40

40
English
Problem
The 'ready to
flash' light does
not go on when
I place the body
attachment on
my skin, but the
cooling fan works.
The 'ready to
flash' light is
green but the
appliance does
not produce a
flash when I press
the flash button.
The appliance
becomes warm
during use.
The appliance
does not show
light intensity 1
when I switch it
on.
Cause
The overheat
protection has
been activated.
The appliance
needs to be reset.
This is normal.
The appliance
needs to be reset.
Solution
When the overheat
protection has been
activated, the fan still
works. Do not switch off the
appliance and let it cool
down for approx. 15 minutes
before you continue to use it.
If the 'ready to flash' light still
does not go on when you
place the appliance on the
skin, contact the Consumer
Care Centre in your country,
your Philips dealer or a
Philips service centre.
To reset the appliance,
switch off the appliance
and switch it on again. If the
'ready to flash' light is green
but the appliance still does
not produce a flash when
you press the flash button,
contact the Consumer Care
Centre in your country,
your Philips dealer or a
Philips service centre.
No action required.
To reset the appliance,
switch it off and on again.
If the appliance still does
not show light intensity
1, contact your Customer
Care Centre, your Philips
dealer or a Philips Service
Centre.