Publicidad
USE INSTRUCTION
1. Replace the Coil
- Remove the base of the tank.
- Twist off the used coil on the base.
- Install a new coil to the base.
- Reattach the base to the tank.
2. Install the Tank
Connect the tank to the MOD by screwing the 510 connector. Make sure they are firmly
connected.
3. Fill the E-liquid
1) Regular Version
- Twist the top cap and fill the e-liquid through the slot.
- Lock the top cap back into place.
- Please wait for 5 minutes for the e-liquid to soak into
the coil.
OPEN
1
2
3
OPEN
CLOSE
CLOSE
4
5
6
1
2
7
3
English
3
Publicidad
