USE INSTRUCTIONS
1. Coil Installation
Make sure the cartridge is empty before installing the coil.
2. Coil Replacement
Make sure the cartridge is empty before replacing the coil. Pull
1
2
3
3. Fill the E-liquid
Snap off the drip tip from the cartridge.
Squeeze the e-liquid through the slot.
for the coil to prime.
*If the drip tip cannot be installed, please adjust the installation
angle. DO NOT force it in to avoid damage. DO NOT move the
drip tip frequently in case of leakage.
CLOSE
OPEN
2
3
1
4. Install the cartridge
Put the cartridge with installed coil onto the battery. Make sure
2
English