Use Instruction - Vaporesso SWAG PX80 Manual Del Usuario

Thank you for choosing Vaporesso product. Please read this
instruction carefully before use to ensure a perfect experience.
If there is any additional requirement about this product, please
consult the local agent or contact us through our website:
www.vaporesso.com

USE INSTRUCTION

1. Install the Coil
Take out the coil from the package of the SWAG PX80, and insert the coil
firmly into the POD.
2. Replace the Coil
1) Please confirm the POD is empty before coil replacing.
2) Rotate the drip tip so that the triangle mark on it is aligned with the
lock mark on the top cap;
3) Press down the drip tip to push out the used coil;
4) Pull out the used coil and install a new one, ensuring the bottoms
both of the coil and pod are aligned. The drip tip will be back in place
when replacing finished.
Rotate the Dip Tip
Replace the Coil
3. Fill the E-liquid
- Uncover the silicone plug at the bottom of the POD according to the
arrow direction;
- Gently insert the e-liquid filling bottle tip to the filling slot and press
down to squeeze the e-liquid through the slot.
- Please wait for 5 minutes for the e-liquid to soak into the coil.
1 English
E N G L I S H
Align the Marks
Align the Bases
Press the Dip Tip
Rotate to Lock