Pride Mobility Travel Scooter Serie Manual De Instrucciones página 18

I I I . B A T T E R I E S A N D C H A R G I N G
NOTE: Some batteries require the removal of a nut
and bolt when disconnecting the battery cable from
the battery terminal. See figure 15.
To change batteries in Battery Pack Style B (see
figure 6):
1. Disconnect the battery harness and remove the
battery pack from the Travel Scooter. See
figure 16.
2. Unzip the battery pack to expose the batteries.
3. Disconnect the black (-) and red (+) battery cables
from the battery terminals of each battery.
4. Remove the old batteries.
5. Place the new batteries into the battery pack.
6. Connect the red battery cable to the positive (+)
battery terminal of each battery.
7. Connect the black battery cable to the negative (-)
battery terminal of each battery.
8. Completely zip the battery pack.
9. Reinstall the battery pack and connect the battery
harness.
To change batteries in Battery Pack Style C (see
figure 6):
1. Remove the seat and rear shroud.
2. Disconnect the battery harnesses and tie-down
strap then remove the battery pack from the Travel
Scooter. See figure 16.
3. Unzip the battery pack to expose the batteries.
4. Disconnect the black (-) and red (+) battery cables
from the battery terminals of each battery.
5. Remove the old batteries.
6. Place the new batteries into the battery pack.
7. Connect the red battery cable to the positive (+)
battery terminal of each battery.
8. Connect the black battery cable to the negative (-)
battery terminal of each battery.
9. Completely zip the battery pack closed.
10. Reinstall the battery pack then connect the battery
harnesses and battery tie-down strap.
11. Reinstall the rear shroud and seat.
NOTE: If you encounter a damaged or cracked
battery, immediately enclose it in a plastic bag and
contact your local waste disposal agency or
authorized Provider for instructions on disposal and
battery recycling which is our recommended course
of action.
18
Figure 15. Disconnecting the Battery Cable on a 17-22
Ah Battery Box
IDENTIFICATION KEY
1. Battery Tie-Down Strap
2. Front-to-Rear Harness
3. Battery Harness
2
1
Figure 16. Battery Tie-down Strap
3
Travel Scooter Series