Pride Mobility Travel Scooter Serie Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

I I . Y O U R T R A V E L S C O O T E R
Speed Adjustment Dial
This dial allows you to preselect and limit your Travel Scooter's top speed.
The image of the tortoise represents the slowest speed setting.
The image of the hare represents the fastest speed setting.
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your Travel Scooter up to the
maximum speed you preset with the speed adjustment dial.
Place your right hand on the right handgrip and your left hand on the left handgrip.
Use your right thumb to push the right side of the lever to disengage your Travel Scooter's brakes and
move forward.
Release the lever and allow your Travel Scooter to come to a complete stop before pushing the other
side of the lever to move in reverse.
When the throttle is completely released, it automatically returns to the center "stop" position and
engages your Travel Scooter's brakes.
Lights Switch (If Equipped)
This switch controls your Travel Scooter's lighting system. See figure 4.
Toggle the switch forward to turn on the lighting system.
Toggle the switch rearward to turn off the lighting system.
WARNING! Scooter users are required to use their lights when visibility is restricted —
day or night.
REAR COMPONENTS
The manual freewheel lever, anti-tip wheels, and
motor/transaxle assembly are located on your Travel
Scooter as shown. See figure 5.
WARNING!
Travel Scooter into or taking it out of
freewheel mode, remove the key
from the key switch. Never sit on a
Travel
Scooter
freewheel mode. Never put a Travel
Scooter in freewheel mode on any
incline.
Manual Freewheel Lever
Whenever you need or want to push your Travel
Scooter for short distances, you can put it in
freewheel mode.
1. Locate the manual freewheel lever at the top right
of the rear section.
2. Push forward on the manual freewheel lever to
disable the drive system and the brake system.
You may now push your Travel Scooter.
3. Push the manual freewheel lever rearward to
reengage the drive and the brake systems; this
takes your Travel Scooter out of freewheel mode.
8
Before
placing
your
when
it
is
in
IDENTIFICATION KEY
1. MANUAL FREEWHEEL LEVER
2. MOTOR/TRANSAXLE ASSEMBLY
3. ANTI-TIP WHEELS
Figure 5. Rear Components
1
2
3
Travel Scooter Series

Publicidad

Tabla de contenido
loading

Tabla de contenido