Pride Mobility Travel Scooter Serie Manual De Instrucciones página 23

V . C O M F O R T A D J U S T M E N T S
Metal tab style positioning belt
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into
the plastic housing on the opposite strap until you
hear a "click." See figure 22.
2. Pull the strap on the right side of the belt until it is
secure, but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic
housing.
Reusable hook and
positioning belt
To adjust the positioning belt for operator comfort:
1. Align the two sides of the belt placing the looped-end
side directly above the coarser side ("hook") of the
opposite belt. Press firmly together to fasten. See
figure 23.
To release the positioning belt:
1. Grasp the looped-end side of the belt and pull up to
detach from the other side of the belt.
MANDATORY! Make sure the positioning
belt is properly secured to the scooter
and is adjusted for operator comfort
before each use.
MANDATORY! Inspect the positioning
belt for loose parts or damage, including
tears, worn spots, bent hardware, or
damaged latch mechanisms, dirt or
debris, before each use of the scooter. If
you discover a problem, contact your
authorized Provider for maintenance
and repair.
Travel Scooter Series
loop fastener style
Figure 22. Positioning Belt - Metal Tab Style
Figure 23. Positioning Belt - Reusable Hook and
Loop Fastener Style
23