Patek Philippe 240 Q Manual De Instrucciones página 13

– Do not perform any calendar corrections
between 3 p.m. and 2 a.m. During this period, the
mechanisms that change the displays are active
and could be damaged by manual interventions.
– All settings and corrections must be performed
in the specified order.
1. preparations
Start by manually winding the movement (max.
10 turns of the crown) to get it going before
proceeding with any other setting or correction.
Advance the hands with the crown until the
24-hour hand (in the subsidiary dial at 9 o'clock)
points at 6 o'clock.
/
2. setting correcting the date
Repeatedly press the push piece between 11 and
12 o'clock or at 11 o'clock (Nautilus model) until
the correct date is displayed on the subsidiary
dial at 6 o'clock.
/
3. setting correcting the leap year cycle
and the month
Repeatedly press the push piece between 12 and
1 o'clock or at 1 o'clock (Nautilus model) until
the subsidiary dial at 3 o'clock displays the cor-
rect year (4 represents the leap year) and the
correct month. Leap year cycles can be found in
the "Full moon and leap year calendar" brochure
delivered with your watch.
13