SMA STP50-40-COM-RM-10 Serie Instrucciones Para El Montaje página 12

4 Removing the Communication Assembly
7. If necessary, remove the communication modules (see the manual of the communication
module).
8. Remove the cable tie from the ferrite of the ribbon cable X1.
9. Remove all plugs from the used sockets of the
communication assembly.
10. Remove the three screws of the communication
assembly (TX20), remove the communication
assembly and dispose of the screws.
12 STP50-40-COM-RM-xx-10
SMA Solar Technology AG
3x 3x
Replacement Manual