RIB JOLLY BIG ONE Manual Del Usaurio página 27

Connect the power supply cable to the clamps provided.
CAUTION: Make the connections according to the chart below (OPEN button with OPEN
clamp, CLOSE button with CLOSE clamp and connect the direct phase of the power supply
to the COM clamp).
B = CAP =
Electrobrake Capacitor
Screw the run stop cover back on.
Verify that the switch is on INS (In this phase the micro-switches do not work and the C1
and C2 run stop cams are automatically regulated).
B
M2 M1
OPEN
CLOSE
KEY SELECTOR
27
PUSH BUTTON
POWER SUPPLY
CLOSE
OPEN
G
B
N
L