Product Description And Intended Use - Nice NiceOne OXI/A Serie Instrucciones Y Advertencias Para La Instalación Y El Uso

ENGLISH
1 – PRODUCT DESCRIPTION AND
INTENDED USE
This receiver is part of the series "NiceOne" produced by
Nice spa. The receivers in this series are destined for use
on the control units fitted on systems for the automation of
gates, garage doors and road barriers. Any use other than
as specified herein is to be considered improper and is
strictly prohibited! The manufacturer denies all liability
for damage deriving from improper use of the product
and use other than as specified in this manual.
1.1 – The "NiceOpera" system
The receivers in the series NiceOne are part of the "NiceOp-
era" system. This system has been designed to simplify the
programming phases, use and maintenance of the de vices
normally used in automation systems. The system comprises
various software and hardware devices capable of intercom-
municating via radio, by means of the "O-Code/A " encoding
system or a "physical" connection via cable.
The main devices that make up the NiceOpera system are:
– O-Code/A compatible transmitters;
– O-Code/A compatible receivers;
– O-box programming unit;
– Control units and gearmotors with "T4 Bus";
– O-View programmer for devices with "T4 Bus".
2 – FUNCTIONAL PRODUCT
SPECIFICATIONS
– The receiver manages "O-Code/A" radio encoding with
variable code (rolling-code), which enables use of all the
new functions in the NiceOpera system.
The receiver is also FLOR/A compatible. However, in this
case some of the exclusive NiceOpera system func-
tions described in this manual cannot be used.
– The receiver has a capacity of 1024 spaces in which to
memorise transmitters. If the transmitter is memorised in
"Mode I", all the relative keys will occupy 1 memory alloca-
tion; otherwise if memorised in "Mode II", each memorised
key will occupy 1 memory allocation (for memorisation pro-
cedures, see below in this manual).
– Each receiver has its own identification number called a
"Certificate".
This number enables access to a series of operations, such
as: Memorisation of new transmitters without the need for
direct intervention on the receiver and use of the O-View
unit, by means of the "T4 Bus" connection.
The sealed coupon in the product pack contains the sheet
with the certificate number of this receiver. Caution! – this
coupon must be kept in a safe place as it enables access
to data stored in the receiver, unless further protection mea-
sures are adopted, such as the use of a security password.
– This product may only be used with control units equipped
with SM plug connectors (fig. 1). Note – to identify compat-
ible control units, refer to the Nice product catalogue.
– These models automatically recognise the characteristics of
the control unit to which they are connected and the receiv-
er self-installs as follows.
Caution! – The number and variety of the commands avail-
EN
1