Product Description - Nice OXI Instrucciones Y Advertencias Para La Instalación Y El Uso

1

PRODUCT DESCRIPTION

OXI is a radio receiver designed for being installed on a control unit for automating gates, garage doors and
road barriers.
– All uses other than the intended use described and use in environmental conditions other than
those described in this manual should be considered improper and forbidden!
• Other product characteristics
– The receiver is compatible with the unidirectional radio codes "O-Code", "O-Code/A", "FloR", "FloR/A",
"Smilo" and "Flo". In particular, the "O-Code" and "O-Code/A" encoding systems allow for exploiting all the
advanced and exclusive functions of the "NiceOpera" system.
– The control unit's receiver has 1024 memory locations to memorise transmitters: one location can alterna-
tively memorise a single transmitter (if its keys are memorised as a "single set", with the Mode 1 procedures
– read Paragraph 3.1), or a single key (if memorised with the Mode 2 procedures – read Paragraph 3.2).
– Each receiver has its own identification number, known as the "Certificate". This allows for accessing several
operations, such as, for example: the memorisation of new transmitters without having to access the receiver,
and the use of the O-View programmer through its "BusT4" connection to the control unit.
– This receiver can be used solely with control units equipped with "SM"-type plug connector (verify the most
suitable control units on the Nice product catalogue or on the www.niceforyou.com website).
1 - English
ENGLISH
Instructions translated from Italian