Before First Use - Sage Nutri Juicer Cold BJE430 Guía Rápida

Assembly

BEFORE FIRST USE

Before using your juicer for the first time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the appliance is switched off at the power
outlet and the power cord is unplugged.
Wash the filter bowl surround, filter basket, juicer
cover, food pusher, pulp container and juice jug
and lid in warm, soapy water with a soft cloth.
Rinse and dry thoroughly.
1. Place motor base on a flat, dry surface such
as a bench top. Ensure that the juicer is
switched to OFF at the dial, and the power
cord is unplugged.
2. Place filter bowl surround on top of the
motor base.
3. Align the arrows at the base of the stainless
steel filter basket with the arrows on the motor
drive coupling and push down until it clicks into
place to create a secure fit with the motor base.
6
4. Place the juicer cover over the filter bowl
surround, positioning the lower part of
the feed chute over the stainless steel
filter basket.
5. Raise the safety locking arm up and locate
into the two grooves on either side of the
juice cover.
6. The safety locking arm should now be in
a vertical position and locked into place on top
of the juice cover.