Audio Menu; System Menu - Swann DVR4-5000 Instrucciones De Operación

Audio Menu

Record: Set to ON to record audio from the Audio Input on the back of the DVR.
Channel: You can use either channel 1 or 2, both at once or none at all.
Mute: Turns Audio output on or off when viewing or recording cameras.
Alternatively, press the Mute button to turn Audio on or off while viewing your
cameras.
Input Volume: Move the slider to change the volume of the audio recorded.
Output Volume: Move the slider to change the volume of audio playback.

System Menu

Hard Disk Setup: Display information about the installed hard disk including
total size and memory usage.
Overwrite Enable: If activated, when the hard disk is full the DVR will overwrite
the oldest footage automatically. Default: Yes.
Format HDD: This option will permanently delete all data on the hard disk. The
password must be correctly entered to format the hard disk.
Account: Choose this submenu to alter/custiomise your user account settings.
You can set up to four (4) user accounts, each with varying levels of access. A
"guest" account will have minimal access, whilst an "operator" will be able to ac-
cess most areas but not reset other user's passwords or delete events. Full control
is only available in the "admin" account (which can be renamed).
Note: The default account is "admin", and the password is "111111".
14 14
The Audio menu sets the audio
recording and volume options.
Note: You must have a camera with
audio or a powered microphone to
record or monitor audio.
The System menu provides general
setup options such as hard disk
information, time, date and firmware
settings.