Connecting Cameras And Power Adapter - Swann DVR4-5000 Instrucciones De Operación

Connecting Cameras and Power Adapters
2
1. Connect the Power and BNC ends of the
MaxiBright Camera to an Extension
Cable.
2. Connect the end of the
Cable to a Video Input on the back of
the DVR.
3. Connect the Power Connector of the
Extension Cable to the Power Splitters.
4. Connect the Power Splitter to the Cam-
era Power Adapter.
5. Plug in the Camera Power Adapter and
the DVR Power Adapter to mains power
outlets.
1
Tips and Tricks
Connecting the cameras and the DVR is relatively
BNC Extension
straight forward. However, there are a couple of
things that can go amiss, particularly if you're not
familiar with connecting A/V equipment. Here's a
couple of points to watch out for:
1.
2.
3.
Double check if your plugging a cable into an
input or an output. Plugging a camera into an
output will not yield any useful results, like-
wise attaching a TV to an input won't display
anything.
When installing cables, avoid placing cables
too near mains electrical cables. AC power
generates an electromagnetic field which will
interfere with information being transmitted
along the cable.
For best results, avoid joining cables together.
Joining cables reduces signal integrity - if you
really need a longer cable, we suggest pur-
chasing a longer extension cable.
3
4
5
7