Front Panel - Swann DVR4-5000 Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Layout of DVR

Front Panel

6
1. Quad & Channels 1 to 4
Changes the viewing mode on
the DVR. Channels 1 through 4
will display that channel. Quad
will display a split-screen view
divided into four windows.
When viewing the menu, the
Channel buttons are used for
navigation.
2. REC (Record)
The REC button will engage
manual recording mode. The
record icon will be displayed
onscreen whilst the DVR is re-
cording.
3. STOP
Stops playback.
4. PLAY
Once an event has been record-
ed, use PLAY to enter playback
mode. You will be taken directly
to the time-search interface.
Top Panel and Side USB port
1
1. MENU / POWER
Press quickly to display the LCD
configuration menu or move
the cursor to the right. Press
and hold for a few seconds to
turn the screen (not the DVR it-
self) on or off.
2. DOWN
Move the parameter prompt in
the LCD menu downwards.
1
4
8
7
5
5. FWD (Fast-Forward)
Press to speed up playback. The
more FWD is pressed, the faster
the footage will play (choose
from x2, x3 and x4 speeds).
6. REW (Rewind)
When playing back, press REW
to play footage backwards. The
speed and quality of rewind-
ing footage will depend on the
quality settings when it was re-
corded.
7. PAUSE
Pauses playback.
8. MENU / ESC
Opens the DVR menu when in
live viewing or playback modes.
When in a menu, this button
will take you back to the pre-
vious screen or menu you were
in.
5
2
3
4
3. UP
Move the parameter prompt in
the LCD menu upwards.
4. & 5. + / -
Increases/decreases the volume
of the built-in speakers when
not in the LCD menu. When in
the LCD menu, these buttons
alters the selected value.
8
2
11
9
9. UP / DOWN
Used for navigation and to
change values in the menus.
10. SELECT / EDIT
Selects and confirms value
changes in the menu.
11. LEDS / IR SENSOR
The red LED lights up whilst in
record or playback mode. The
green LED is lit whilst the unit
is supplied with power and
turned on. The IR sensor is for
the infrared remote control.
12. PTZ (Pan, Tilt, Zoom)
Press PTZ to enter Pan, Tilt,
Zoom control mode.
6
6. SIDE USB PORT
Used for attaching a compatible
USB flash drive, for backing up
footage.
Note: Do not connect the DVR
to a computer, or to any device
other than a USB flash drive.
Other devices may be harmed,
or harm the DVR.
10
12
5

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido