Display Explanations - HoMedics BPS-050 Manual De Instrucciones

DISPLAY EXPLANATIONS

Original Document Name: AI-LD-01-V1
Date/Time Indicator
Systolic
Pressure
Diastolic
Pressure
Pulse Rate
9
Display Symbols:
Inflation Symbol: Appears when cuff requires inflation.
Deflation Symbol: Appears when cuff is deflating.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the pulse rate per minute.
If any of the following letters and numbers appear in the area that
diastolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for
more information.
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Measurement Error: Measurement result exceeds
measurement range.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear,
then measure again.
Data Error: Remove and reload the batteries.
Recalibration Alert: Recalibration recommended. See
page 25 for information.
10