Display Explanations - HoMedics Walgreens 518729 Manual Del Usuario

DISPLAY EXPLANATIONS

Date/Time Indicator
Systolic
Pressure
Diastolic
Pressure
Pulse Rate
9
Display Symbols:
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
User 3: Appears when the monitor is operated by User 3.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the pulse rate per minute.
Risk Category Indicator: Compares readings against blood
pressure guidelines. See page 20 for more information.
Memory Select: Identifies memory mode. See page 21 for
more information.
If and any of the following letters and numbers appear in the
area that systolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for
more information.
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear,
then measure again.
Error Determining Measurement Data: Measure again
Recalibration Alert: Recalibration recommended. See
page 26 for information.
10