Display Explanations; Display Symbols - HoMedics BPW-050 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DISPLAY EXPLANATIONS

Systolic
Pressure
Diastolic
Pressure
Date/Time
Indicator
Pulse Rate
11

Display Symbols:

User 1: Appears when the monitor is operated
by User 1.
User 2: Appears when the monitor is
operated by User 2.
Weak Battery Symbol: Appears when batteries
should be replaced.
Pulse Symbol: Shows the pulse rate per minute.
Memory Symbol: Shows the memory reading number
Memory Average: Displays average of last
3 readings
Risk Category Indicator: Compares blood pres-
sure against blood pressure guidelines. See page
24 for more information.
(No Symbol)
START
STOP
If any of the following letters and numbers appear in the
START
STOP
area that diastolic pressure should be displayed, an error
has occurred with your reading. See Troubleshooting
section of this manual for more information.
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady
during measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the unit
off to clear, then measure again.
Data Error: Remove and reload the batteries.
Recalibration Alert: Recalibration recommended.
– –
See page 28 for information.
12

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido