Technical Specifications; Battery Capacity - Porsche Charge-o-mat Pro Manual Del Usuario

TECHNICAL SPECIFICATIONS

Model number
Rated Voltage AC
Charging voltage
- Lead-acid
Charging voltage
- Lithium-Ion
Min battery voltage
Charging current
Current, mains
Back current drain
4
Ripple
5
Ambient temperature
Charger type
Battery types

Battery capacity

- Lead acid
Battery capacity
- Lithium-Ion
Dimensions
Insulation class
Back current drain is the current that drains the battery if the charger is not
4
connected to the mains. This battery charger has a very low back current.
20020455B Porsche 60W Charge-o-Mat PRO, Manual 1 EU, Print file 001.indd 11
1049
220–240VAC, 50–60Hz
14.4V, 14.7V
13.6V
2.0V
5A max
0.7Arms (at full charging current)
Less than 1Ah/month
Less than 4%
-20°C to +50°C, output power is reduced
automatically at high temperatures
Fully automatic charging cycle
All types of 12V lead-acid batteries (WET,
MF, Ca/Ca, AGM and GEL) and 12V
LiFePO batteries.
4
1.2–14Ah, 14–160Ah
5–120Ah
168 x 65 x 38mm (L x W x H)
IP20
The quality of the charging voltage and charging current is very important.
5
A high current ripple heats up the battery which has an aging effect on the
positive electrode. High voltage ripple could harm other equipment that is
connected to the battery. This battery charger produce very clean voltage
and current with low ripple.
EN • 11
2014-06-26 14:38:35