Tabla de contenido
Publicidad
GETTING TO KNOW YOUR CONTROL PANEL
Our streamlined, push-button control
panel is easy to read and easy to use.
On/Off button with LED Indicator
Manually turns coffeemaker on or off.
Hour and Minute Buttons
Use to program clock and Auto On
function.
Clock/LCD Display
Displays time of day and Auto On times,
and Strength Control setting.
Program Button with LED Indicator
Sets and/or displays programmed
Auto On time.
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in, 12:00
will appear.
Entering Time Set Mode
Hold down the Hour or Minute button
until the clock begins flashing. Press
either button to select the desired
Grind Off Button with LED Indicator
Turns off the grinder when using pre-
ground coffee.
Grind Control Knob
Programs unit to grind the right amount of
coffee beans for the number of cups and
flavor strength selected.
Strength Control Knob
Use to select a mild, medium or stronger
coffee flavor. Bars (
indicate selected flavor strength.
Clean Basket & Clean Chute
Display when action is required to clean
the chute or basket. (see page 11-12).
time. Hold buttons down to scroll
through the digits, or press and
release to advance one digit at a time.
When scrolling, the numbers will
advance slowly and then speed up.
When the number displayed
approaches the desired time, press
and release to advance one digit at a
time. Be sure the PM indicator is on if
a PM time is desired.
7
) in display
Publicidad
Tabla de contenido
