Making Coffee With Whole Beans - Cuisinart DGB-900 Serie Manual De Instrucciones

Exiting Time Set Mode
a. Press any function button besides
Hour or Minute to exit mode and
activate the selected function.
b. If you do nothing for 5 seconds the
mode will be exited.
SETTING THE PROGRAM TIME
When you press the Program button,
it displays a previously selected auto-on
time, or the default time (12:00pm).
Entering Set Program Time Mode
Press and hold the Program set button
until the green light and LCD display
begin to flash. You are now in Set
Program Time mode. Set the time you
want coffee to begin brewing by
following the instructions in Entering
Time Set Mode, page 7. The
coffeemaker will start to brew at the
programmed time. The Program mode
cannot be entered if the coffeemaker
is in its brew cycle.
Exiting Set Program Time Mode
a. Press and release Program button.
b. Press any function button besides
Hour or Minute to exit mode and
activate the selected function.
c. If you do nothing for a period of five
seconds the mode will be exited.
MAKING COFFEE WITH
WHOLE BEANS
1. Follow instructions for "Before
Brewing Your First Pot of Coffee" on
page 9.
2. Fill the Water Reservoir
Open the reservoir lid and pour in water,
using the water level window indicator to
measure the number of cups desired.
NOTE: Do not exceed the 12-cup line.
Doing so could cause carafe to overflow.
3. Add Beans
Remove the hopper lid. Make sure the
hopper is in the LOCK position with
arrows lined up, then add enough beans
for the number of cups you intend to
brew. We recommend keeping the hop-
per at least half full. But, be careful:
maximum capacity is ½ lb. and overfill-
ing the hopper may jam the grinder.
8