Install Filters - Broan-NuTone Rangemaster RM60000 Serie Instrucciones De Instalación Y Manual De Usuario

14. INSTALL FILTERS

Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first and finish with center one(s).
1. Insert upper end of filter into the hood (finger sized cup side).
2. Raise lower end toward the inside of hood.
3. Position rear part of filter into channel and pull.
4. Using finger sized cup, pull on the upper end of filter and slide it under the front inner retaining piece.
2
3
HD0024
Replacement filters are available from your dealer. See label inside hood for size and part number.
Baffle Filters
Baffle filters are available as an option. To order them, refer to the table below to find the right filter kit number for your hood. To install
them, refer to instruction sheet included with baffle filter kit.
1
4
HD0011
BAFFLE FILTER (TYPICAL)
CAUTION
HD0065
KIT #
RBF6030
RBF6036
RBF6042
RBF6048
RBF6054
RBF6060
RBF6066
RBF6072
- 9 -
HOOD WIDTH
30"
36"
42"
48"
54"
60"
66"
72"