Accessories
Supplied with Instrument
User Guide
Mains power cord
Oil test vessel fitted with spherical electrodes 12,7 mm diam.
Oil test set preparation kit
comprising:-
two magnetic stirrers
pair of cylindrical electrodes 1 inch diam.
pair of mushroom electrodes 36 mm diam.
*electrode spacing gauges for 1 mm (0,04 inch), 2 mm (0,08 inch),
2,5mm (0,1 inch) and 4,0 mm (0,16 inch)
Protective cover
Optional
Voltage calibration meter (0-100kV)
Oil test vessel fitted with mushroom electrodes 36 mm diam.
Oil test vessel fitted with cylindrical electrodes 1 in diam.
Oil test vessel for ASTM D1816 specification (motorised stirrer)
A pair of mushroom electrodes
A pair of cylindrical electrodes
A pair of spherical electrodes
A pair of cylindrical electrodes with 0,5 mm edge radius for use with any test vessel
Printer paper 57,5 mm wide, 15 m long, 50 mm diam.
Printer ribbon Epson part no. ERC-09 (IRC160)
Printer lead, 9 pin female 'D' connector to 25 way male 'D' connector
PC Download lead
Transportation trolley
Note:- Capacity of oil test vessels is 400 ml, except for the ASTM D1816 vessel which is 800 ml.
* The new spacer gauges are no longer big enough to have the diameter marked on them. They now
have a series of grooves cut into them to state the difference between them which is as follows:
1 rings - 1mm
2 rings - 2mm
3 rings - 2.5mm
4 rings - 4mm
8
Part Number
6172-064
25424-860
6231-445
6220-276
5340-334
OTS/VCM100
6231-447
6231-446
6111-146
6220-482
6220-483
6220-484
6220-538
25995-001
25995-002
6220-283
25955-025
6320-224