Noise Level; Technical Specifications; Section 2; General Safety Regulations - breviglieri Turbo T 76SR Instrucciones De Empleo Y Mantenimiento

macchine agricole
▪
C) Serial number
▪
D) Weight (in kg)
▪
E) Year of manufacture
The data on the identification plate of the machine should be copied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
▪
Driveline
▪
Operation and maintenance manual for the machine
▪
«CE» declaration of conformity

1.5 NOISE LEVEL

The noise level (overhead noise) has been measured in compliance with the current laws, with the following results:
▪
Acoustic pressure LpAm (A)
▪
Acoustic power LwA (A)
The operator is advised to wear adequate ear muffs as personal protective equipment to prevent damage to his hearing during

1.6 TECHNICAL SPECIFICATIONS

Model Working
width
in
76 86.6
t sr - 220
76 78.7
t sr - 200
76 70.9
t sr - 180
76 61
t sr - 155
76 51.1
t sr - 140
76 49.2
t sr - 125
76 41.3
t sr - 105

SECTION 2

General safety regulations

2.1 SAFETY NOTES

The user must inform his personnel about the risks deriving from accidents, about the safety devices installed to safeguard the
operator and about the general accident-preventing regulations established by the Directives and by the laws in force in the country
where the machine is used. It is therefore essential for operators to carefully read this manual, particularly the safety notes, and
to pay great attention to operations which could be particularly hazardous.
The Manufacturer declines all and every liability for failure to comply with the safety and prevention regulations given in
this manual.
Pay attention to this symbol when it appears in the manual. It indicates a possible danger situation.
There are three danger levels:
.................................................................................................................................... dB 88
......................................................................................................................................... dB 105
daily work with the machine.
Weight Power required
lb HP
1367 50 - 70
1268 45 - 70
1168 40 - 65
1091 35 - 65
1047 30 - 60
1003 30 - 50
959 30 - 40
76
t sr
CAUTION
N° cutting tools
kW Hammers
37 - 52 22
33 - 52 20
29 - 48 18
26 - 48 16
22 - 44 14
22 - 37 12
22 - 29 10
- 22 -
Belts
Knives n°
66
60
4
54
48
540 - 1000
42
3
36
30
RPM