HoMedics BPA-060 Manual Del Usuario página 19

s in
n
arm
st
1. Press the USER-SELECT button to choose User 1
or User 2.
2. With the cuff wrapped around your arm, press the
START/STOP button. Do not inflate the cuff unless it
is wrapped around your arm. All digits will light up to
check the display functions. The checking procedure
will be completed after about 3 seconds.
3. After all symbols disappear, the display will show
"00". The monitor is "Ready to Measure" and will
automatically inflate the cuff to begin measurement.
The cuff will then start deflating as measurement
continues.
OR
18