How To Maximize Your Security And Protection Of Your Machine - Pecol RB2600PROHP-230 Manual De Instrucciones

1. How to maximize your security and protection of your machine

Failure to observe at least the following instructions may cause immediate damage to
the user and/or the equipment.
1. Follow the safety recommendations in this manual (see pages 49, 50 and 53).
2. Take into account the effects of kickback and attitudes to minimise it (see pages
51, 54 and 55).
3. Fix the disc or accessory correctly and never use discs and accessories of poor
quality or in poor conservation status. Do not carry out any adaptation of accessories,
parts, etc. (see pages 50, 52, 53, 54, 55 and 59).
4. Do not use discs with lower limit rotation than the angle grinder (see page 46,
50, 52 and 59).
5. Do not press the locking button on the shaft while the machine is still rotating
(see pages 52 and 54).
6. Do not operate without the protection guard or position it incorrectly (see pages
50 and 53).
7. Never touch the disc immediately after the operation as it may be hot (page 54).
8.
Do not lower or put down the machine until it has stopped moving (page 54).
9. Do not position youself or position the angle grinder incorrectly during the
activity and cutting operation (see pages 54 and 55).
10. Only carry out maintenance guided by this manual or by the PECOL Technical
Assistance Service (see pages 55 to 57).
11. Do not connect to a power grid that is not compliant with the intended use of the
power tool (see pages 46, 50 and 57).
12. Do not take the machine, discs and accessories to the limit of its capacity (see
pages 46, 50, 51, 53, 54, 55 and 57).
FR EN ES
P.45
PT