Cutting Operation - Pecol RB2600PROHP-230 Manual De Instrucciones

Pay attention to the power cable so that it is not damaged by sharp edges in the work
area or by the operating grinder itself.
• Never use any liquids to perform works with this power tool.
• Do not obstruct the air vents of the machine.
• Disconnect the power tool from the plug at the end of the operation.
Never use the shaft lock button or rest the disc on a surface to stop the movement
faster.
Never touch the disc immediately after the operation as it may be hot.

3.9. Cutting operation

1. Hold the machine firmly and do not perform side movements to avoid fragmenting the
disc.
2. Position the face or neck always behind the acting plan of the disc.
3. Always use both hands, and with the auxiliary handle installed. Follow the cut in the
direction in which the disc makes the downward movement; the sparks and particles
created by the cut will be projected downwards. Never use cutting disc for deburring.
1.
P.54
PT ES
2.
Região
Safe
segura
zone
EN FR
3.
Kickback
Forward
direction
Rotation