Maintenance; General Recommendations; Lubrication And Exchange Of Carbon Brushes - Pecol RB2600PROHP-230 Manual De Instrucciones

4. Maintenance

4.1. General recommendations

• Always make sure that the machine is switched off and the plug is disconnected
before any intervention.
• Always keep the machine clean, especially the ventilation grids and switch. Do not use
sharp objects to perform any cleaning.
• Regularly clean with dry compressed air to remove dirt and metal particles from
inside the machine. These accumulated elements can damage it. Always wear gloves
and safety glasses in this operation.
• Never use chemicals for cleaning as they may degrade various components of the
power tool. The following examples are not recommended: solvents, silicone based
products, gasoline, ammonium based products, carbon chlorides, etc. Use only a cloth
moistened with mild soap. Do not allow liquid to enter the machine.
• For complex maintenance, refer the power tool to the PECOL Technical Assistance
Service.
• If damage or malfunction occurs, do not operate the machine and send it to PECOL
Technical Assistance Service.
• Only use PECOL accessories and spare parts, tested and with guaranteed quality and
compatibility. To access specific accessories and spare parts for your power tool, go to
our website via QR Code or link.
www.pecol.pt/accessories/rb2600prohp-230.html

4.2. Lubrication and exchange of carbon brushes

The carbon brushes and lubrication of the gearbox of this machine are intended to last
for long periods of operation. Lubrication should only be checked when changing the
carbon brushes. If necessary, replace the brushes as described in the Troubleshooting
Chart (page 57), refer the power tool to the PECOL Technical Assistance Service for
proper replacement and revision of the lubrication in the correct specification and
quantity.
FR EN ES
P.55
PT