Applying Blood To The Test Strip - Prodigy Pocket El Manual Del Propietario

PRODIGY Pocket® Blood Glucose Meter
Warning: The first drop of blood usually
contains tissue fluid and serum, which may
affect the test result. It should be discarded.
Owner's Manual
PRODIGY Pocket® Blood Glucose Meter
Applying Blood to the Strip
STEP 1: Insert the Test Strip
Insert a test strip with the contact bar
end entering into the test slot first.
Push the test strip as far as it will go
without bending it. The meter turns on
automatically. See Figure 31.
STEP 2: Apply Blood Sample
When the meter shows the " ", apply
blood to the opening of the absorbent
channel of the test strip where it meets
the narrow channel. Blood will be
drawn into the test strip.
See Figure 32.
The test strip confirmation
window should be completely
filled before the meter begins
to count down. The meter will
beep when the confirmation
window is full. See Figure 33.
If the confirmation window is
not full, "L-b" is displayed.
40
Figure 32
Owner's Manual
Figure 31
Figure 33
41