Applying Blood To The Test Strip - Prodigy AutoCode Manual Del Proprietário

Applying Blood to the Test Strip

STEP 1: Insert the Test Strip Insert a
test strip with the contact bar entering
the test strip slot first. Push the test strip
in as far as it will go without bending
it. The meter will turn on automatically.
See Figure 31.
Voice Speaks: "Your meter is on.
Please wait. Please apply blood into
the test strip."
STEP 2: Apply Blood Sample
When the meter shows "
blood to
channel of the test strip where it
will be drawn into the test strip.
See Figure 32.
If the test strip confirmation window
is full, you will hear a beep.
Voice Speaks: "Testing."
AutoCode
the open
Owner's Manual
Blood Glucose Meter
®
", apply
absorbent
Figure 31
Figure 32
42