Cebora 428 Serie Manual Instrucciones página 21

4.2 DeviceNet
4.2.1 Front panel and diagnostic.
1
1
4.2.2 1 – Network status LED (NS)
Status
Off Not online / no network power.
On-line, one or more connections es-
Green
tablished.
Flashing green On-line, no connection established.
Red Link failure.
Flashing red One or more connections timed-out.
Alternating
Self test running.
Red/Green
4.2.3 2 – Module status LED (MS)
Status
Off Not operating.
Green Operating in normal conditions.
Incomplete, incorrect or missing con-
Flashing green
figuration.
Red Unrecoverable fault(s).
Flashing red Recoverable fault(s).
Alternating
Self test running.
Red/Green
4.2.4 3 – DeviceNet connector
Pin Signal
1 V - Negative bus supply voltage.
2 CAN_L CAN low bus line.
3 Shield Cable shield.
4 CAN_H CAN high bus line.
5 V + Positive bus supply voltage.
4.2.5 ROT2 – DeviceNet node-id
Pos.
0 ÷ 9
3.300.139/B
2
3
5
Indication
Indication
Value
Value
node-id
4.2.6 ROT3 – Baud rate.
Pos.
0
1
2
3
4 - 9
Baudrate
125 kbps
250 kbps
500 kbps
(Auto-baud)
Reserved (125 kbps)
21