Specifications - LG DLHX4072 Serie Manual Del Usuario

Before calling for service (cont.)
Problem
Steam does not
generate but no error
code is shown
Garments still
wrinkled after in dryer.
STEAM FRESH™
There are no creases
left on garment after wrinkles from fabric.
STEAM FRESH™
STATIC
Garments are too
damp or too dry after
Garments are not uniformly Number of garments or load size not properly
damp after EASY IRON selected at the beginning of the cycle.
Water drips from door
during Steam Cycle
during Steam Cycle
Drum does not turn
during Steam Cycle
Cannot see steam
beginning of cycle
The display shows
Odors remain in
clothing after completely.
STEAM FRESH™
is on during the
drying cycle
TM
indicator shows four restrictions.
bars during the drying
cycle
lint buildup or debris.

SPECIFICATIONS

Steam Dryer™ Models
Description
Electrical Requirements*
Dimensions
Net Weight
Drying Capacity
- Steam Cycle
Allowable temperature
Possible Causes
operation. Some condensation may drip out the bottom of the door.
will normally form on the inside of the dryer door if the steam system is
operating normally.
will normally turn for about 2 seconds once a minute.
as a comforter.
Dryer can be used in this condition, but drying times may be longer.
will remain on for two hours after the end of the cycle. Opening the door or
pressing the POWER button will turn off the display.
DLHX4072*
Steam Dryer
Please refer to the rating label regarding detailed information.
27" (W) X 30" (D) X 39" (H), 51" (D with door open)
68.6 cm (W) X 76.1 cm (D) X 99.1 cm (H), 129.7 cm (D with door open)
165 lbs(75kg)
IEC 7.3 cu.ft. (8 lb/3.6 kg)
41 °F ~ 95 °F (5 °C ~ 35 °C )
SPECIFICATIONS
Solutions
TM
system, the indicator
43