Call Screening - Amplicomms PowerTel Manual De Instrucciones

On the cordless handset
1. In idle state press the menu key
2. Select Answering sys and press
3. Press
4. Press
5. Speak your announcement after the tone and press key 5
when done.

Call screening

Use this feature to choose whether incoming messages can
be heard on the cordless handset or the corded phone while
they are being recorded. The setting applies to both devices.
1. In idle state press the menu key
2. Select Answering system and press SELECT on the corded
phone or press
3. Select Ans sys setup and press SELECT on the corded phone
or press
4. Select Call screening and press SELECT on the corded phone
or press
5. Select On or Off and press SELECT on the corded phone or
press
On the corded phone
If the answering machine and call screening are on, the an-
nouncement and the incoming message will be heard on the
corded phone while the call is answered by the answering
machine. During this you can:
- adjust the volume with
- press
- press SILENCE to temporarily mute the feature,
- press SCREEN to temporarily turn on the feature if it is set
to off.
Helpline 0844 800 6503 (See page 51 for costs and hours of operation)
to select Announcement.
to select Record annc.
on the cordless handset.
on the cordless handset.
on the cordless handset.
on the cordless handset.
to temporarily turn off the feature.
.
.
or
,
.
45